FOR SALE IS A LOT OF 12
Meyer Sound M’Elodie Line Array Loudspeaker
FREIGHT DELIVERY FOR RESIDENTIAL & LIMITED ACCESS AREAS
Residential Delivery Fee $75.00, Lift Gate Fee $75.00
Limited Access (Hospitals, Schools, Construction Sites,
Churches, Government Facilities
Gate Access, Storage Units, Remote Access, Etc.) $75.00
THIS IS IN ADDITION TO THE SHIPPING FEE
CONDITION
This speaker are in good working condition.
These speakers may have scratches and
cosmetic wear due to previous use and/or age.
These speakers has never been opened or
disassembled. Sorry, no other parts, wiring or accessories
included.
SPECS
Specifications:
DIO INPUT
Type: Differential, electronically balanced
Max. common mode range: ±15 V DC, clamped to earth for voltage transient protection
Connectors: Female XLR input with male XLR loop output or VEAM all-in-one connector (integrates AC, audio, and network)
Input impedance: 10 kΩ differential between pins 2 and 3
Wiring:
Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
Pin 2: Signal +
Pin 3: Signal -
ACOUSTICAL
Operating frequency range: 70 Hz - 18 kHz
Frequency response: 76 Hz - 16 kHz ±4 dB
Phase response: 1.5 kHz - 16 kHz ±30°
Maximum peak SPL: 131 dB
Dynamic range: >110 dB
Acoustical crossover: 1100 Hz
COVERAGE
Horizontal coverage: 100°
Vertical coverage: Varies, depending on array length and configuration
TRANSDUCERS
Low/low-mid:
frequency: Two 8” cone drivers with neodymium magnets
Nominal impedance: 4 Ω
Voice coil size: 1.5”
Power handling capability: 600 W (AES); 900 W peak
High frequency:
3” compression driver
Nominal impedance: 8 Ω
Voice coil size: 3”
Diaphragm size: 3”
Exit size: 1.2”
Power handling capability: 180 W (AES); 360 W peak
AU
Case: Earth ground and chassis
DC Blocking: Differential DC blocking up to max common mode voltage
CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
RF filter:
Common mode: 425 kHz
Differential mode: 142 kHz
TIM filter: <80 kHz, integral to signal processing
Nominal input sensitivity: 0 dB V (1 V rms, 1.4 V pk) continuous is typically the onset of limiting for noise and music.
Input level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V pk) into 600 Ω in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker
AMPLIFIERS
Amplifier type: Three-channel complementary MOSFET output stages (class AB/H)
Output power: 1275 W (three channels; 2 x 500 W, 1 x 275 W); 2550 W peak10
THD, IM TIM: < .02%
Load capacity: 4 Ω low and mid; 8 Ω high channels
Cooling: Convection cooled
AC POWER
AC power connector: PowerCon with looping output or VEAM all-in-one connector (integrates AC, audio and network)
Voltage selection: Automatic, two ranges, each with high-low voltage tap (uninterrupted)
Safety agency rated operating voltage: 95 V AC – 125 V AC, 208 V AC - 235 V AC, 50/60 Hz
Turn on/turn off points: 85 V AC - 134 V AC; 165 V AC - 264 V AC
Idle current: 0.680 A rms (115 V AC), 0.360 A rms (230 V AC), 0.760 A rms (100 V AC)
Max. long-term continuous current (>10 sec): 2.3 A rms (115 V AC); 1.2 A rms (230 V AC); 2.6 A rms (100 V AC)11
Burst Current (<1 sec): 4 A rms (115 V AC), 2 A rms (230 V AC), 4.5 A rms (100 V AC)
Ultimate Short-Term Peak Current Draw: 13 A pk (115 V AC), 6.5 A pk (230 V AC), 15 A pk (100 V AC)
Inrush Current :10 A pk (115 and 100 V AC), 18 A pk (230 V AC)
RMS NETWORK
Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
PHYSICAL
Enclosure: Premium birch plywood
Finish: Black textured
Protective grille: Powder-coated, hex-stamped steel, black mesh
Rigging: QuickFly rigging with four captive GuideALinks in the bottom corners of two aluminum and steel end frames, secured with quick-release pins
Dimensions: 28.54 w x 9.19 h x 12.75 d (724.84 mm x 233.31 mm x 323.85 mm)
Weight: 62 lbs (28.12 kg)
SHIPPING INFORMATION
Our focus is to offer reliable, personalized customer service and earn the continued trust and loyalty of our customers. We provide FREE local pickup and we ship via STANDARD GROUND to the 48 contiguous states on most items. (This does not include AK, HI, PR or the Virgin Islands). However, we offer great shipping rates to those states and territories and all Caribbean Islands. Please note that we do not ship to any P.O. boxes. To ship a freight order to a residential address, there will be a charge of $75 fee and a lift gate fee of $75. Freight shipments that are delivered to a limited access areas such as schools, hospitals, construction sites, gated communities, airports, churches, storage units or any other restricted areas will also be charged a fee of $75. These fees are in addition to the shipping fee listed. Ground shipments will take between 3-5 business days and freight shipments will take between 3-7 business days to ship from our warehouse. Lastly, items that are being sold AS IS OR AS PARTS IS FINAL SALE AND CAN NOT BE RETURNED. Our staff will work diligently to ensure that all orders arrives in a timely manner. Please understand that some factors such as weather, high postal traffic and the performance of the shipping companies are outside of our control.
RETURN INFORMATION
After receiving your order, as the buyer, you must contact us within 3-4 business days with any problems. When returning your order, it must be returned in the original packaging as well as the item that you purchased. Return shipping will be paid by the buyer. Depending on availability, we will exchange a defective item for the same item within the 3-4 business day period. Partial refunds are also available, if the buyer chooses to keep the item and repair it themselves. WE HAVE A 20% RESTOCKING FEE. Filing a claim should be reserved as a last resort to solving an issue. Please give us a chance to solve any issues that you may have for any reason before leaving feedback.
