Meyer Sound UPA-1P Compact Wide Coverage Loudspeaker W/Bracket (Pair)

SKU:
THS-UPA-1P
$2,990.00
Write a Review
Condition:
Used
Current Stock:
MAKE AN OFFER

FOR IS SALE IS A PAIR
Meyer Sound UPA-1P Compact Wide Coverage Loudspeaker W/Bracket

FREIGHT DELIVERY INFORMATION FOR US RESIDENTS:
Residential Delivery Fee $75.00, Lift Gate Fee $75.00
Limited Access (Hospitals, Schools, Construction Sites,
Gate Access, Storage Units, Remote Access, Etc.) $75.00
THIS IS IN ADDITION TO THE SHIPPING FEE

CONDITION DESCRIPTION
These speakers are in good working condition.
These speakers may have dents, scratches, repaint,
scuff marks and cosmetic blemishes from normal usage and age.
These speakers have not been opened or disassembled.
Sorry, no other parts, wiring or accessories
are included in this sale.

SPECS
coustical
Operating Frequency Range1: 60 Hz – 18 kHz
Frequency Response2: 80 Hz - 17 kHz ±4 dB
Phase Response: 600 Hz - 16 kHz ±35°
Maximum Peak SPL3: 133 dB
Dynamic Range: >110 dB
Coverage
Horizontal: 100°
Vertical: 40°
Crossover4
1200 Hz
Transducers
Low Frequency:
One 12" cone driver
Nominal impedance: 4 Ω
Voice coil size: 3"
Power handling capability: 400 W (AES)5
High Frequency:
3" compression driver
Nominal impedance: 16 Ω
Voice coil size: 3"
Diaphragm size: 3"
Exit size: 1.4" throat
Power handling capability: 100 W (AES)5
Audio Input
Type: Differential, electronically balanced
Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
Connectors: Female XLR input with male XLR loop output or VEAM all-in-one connector (integrates AC, audio and network)
Input Impedance: 10 kΩ differential between pins 2 and 3
Wiring:
Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
Pin 2: Signal +
Pin 3: Signal – (optional polarity reversal switch)6
Case: Earth ground and chassis
DC Blocking: Differential DC blocking up to maximum common mode voltage
CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
TIM Filter: Integral to signal processing (<80 kHz)
Nominal Input Sensitivity: 0 dBV (1.0 V rms, 1.4 V peak) continuous is typically the onset of limiting for noise and music
Input Level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 Ω in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker
Amplifier
Type: Two-channel complementary MOSFET output stages (class AB/bridged)
Output Power7: 550 W total
THD, IM, TIM: <.02%
Load Capacity: 2 Ω low channel, 16 Ω high channel
Cooling: Convection; 24 V DC output for optional external fan
AC Power
Connector: PowerCon or VEAM
Voltage Selection: Automatic, continuous range from 90 V AC to 265 V AC
Safety Agency Rated Operating Range: 100 V AC - 240 V AC; 50/60 Hz
Turn-on and Turn-off Points8: 90 V AC on, no turn-off, only fuse-protect above 265 V AC
Current Draw: Idle Current: 0.25 A rms (115 V AC); 0.13 A rms (230 V AC); 0.3 A rms (100 V AC)
Maximum Long-Term Continuous Current (>10 sec): 2.8 A rms (115 V AC); 1.4 A rms (230 V AC); 3.2 A rms (100 V AC)
Burst Current (<1 sec): 3.2 A rms (115 V AC); 1.6 A rms (230 V AC); 3.7 A rms (100 V AC)
Ultimate Short-Term Peak Current Draw: 5.0 A pk (115 V AC); 2.5 A pk (230 V AC); 5.8 A pk (100 V AC)
Inrush Current: <9 A pk (115 V AC and 230 V AC)
RMS Network (optional)
Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer
Physical
Dimensions: 14.50" w x 22.40" h x 14.30" d (368 mm x 569 mm x 363 mm)
Weight: 77 lbs (34.93 kg)
Enclosure: Premium birch plywood
Finish: Black textured
Protective Grille: Powder-coated hex-stamped steel, foam covering
Rigging: Four ring and stud pan fittings, two on both top and bottom. Working load for each fitting is 420 lbs (190.51 kg), 1/5 the cabinet breaking strength (with straight tensile pull); 3/8" or metric M10 nut plates optional

SHIPPING INFORMATION
Our focus is to offer reliable, personalized customer service and earn the continued trust and loyalty of our customers. We provide FREE local pickup and we ship via STANDARD GROUND to the 48 contiguous states on most items. (This does not include AK, HI, PR or the Virgin Islands). However, we offer great shipping rates to those states and territories and all Caribbean Islands. Please note that we do not ship to any P.O. boxes. To ship a freight order to a residential address, there will be a charge of $75 fee and a lift gate fee of $75. Freight shipments that are delivered to a limited access areas such as schools, hospitals, construction sites, gated communities, airports, churches, storage units or any other restricted areas will also be charged a fee of $75. These fees are in addition to the shipping fee listed. Ground shipments will take between 3-5 business days and freight shipments will take between 3-7 business days to ship from our warehouse. Lastly, items that are being sold AS IS OR AS PARTS IS FINAL SALE AND CAN NOT BE RETURNED. Our staff will work diligently to ensure that all orders arrives in a timely manner. Please understand that some factors such as weather, high postal traffic and the performance of the shipping companies are outside of our control.

RETURN INFORMATION
After receiving your order, as the buyer, you must contact us within 3-4 business days with any problems. When returning your order, it must be returned in the original packaging as well as the item that you purchased. Return shipping will be paid by the buyer. Depending on availability, we will exchange a defective item for the same item within the 3-4 business day period. Partial refunds are also available, if the buyer chooses to keep the item and repair it themselves. WE HAVE A 20% RESTOCKING FEE. Filing a claim should be reserved as a last resort to solving an issue. Please give us a chance to solve any issues that you may have for any reason before leaving feedback.

Brand:
Meyer Sound
Model:
UPA-1P
Type:
Compact Wide Coverage Loudspeaker W/Bracket